HP VPN Firewall Appliances Network Management Command Reference

995
• pim ipv6 holdtime join-prune
holdtime join-prune (IPv6 PIM view)
Use holdtime join-prune to configure the global value of the join/prune timeout timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune interval
undo holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds. The value ranges from 1 to 65535.
Examples
# Set the global value of the join/prune timeout timer to 280 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime join-prune 280
Related commands
• holdtime assert
• pim ipv6 holdtime assert
• pim ipv6 holdtime join-prune
jp-pkt-size (IPv6 PIM view)
Use jp-pkt-size to configure the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size packet-size
undo jp-pkt-size
Default
The maximum size of each join/prune message is 8100 bytes.
Views
IPv6 PIM view