HP VPN Firewall Appliances Network Management Command Reference

997
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] jp-queue-size 2000
Related commands
• holdtime join-prune
• jp-pkt-size
• pim ipv6 holdtime join-prune
pim ipv6
Use pim ipv6 to enter IPv6 PIM view.
Use undo pim ipv6 to remove all configurations in IPv6 PIM view.
Syntax
pim ipv6
undo pim ipv6
Views
System view
Default command level
2: System level
Usage guidelines
IPv6 multicast routing must be enabled on the device before this command can take effect.
Examples
# Enable IPv6 multicast routing and enter IPv6 PIM view.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] pim ipv6
[Sysname-pim6]
Related commands
multicast ipv6 routing-enable
pim ipv6 bsr-boundary
Use pim ipv6 bsr-boundary to configure an IPv6 PIM domain border, namely, a bootstrap message
boundary.
Use undo pim ipv6 bsr-boundary to remove the configured IPv6 PIM domain border.
Syntax
pim ipv6 bsr-boundary
undo pim ipv6 bsr-boundary
Default
No PIM domain border is configured.