HP VPN Firewall Appliances Network Management Command Reference

998
Views
Interface view
Default command level
2: System level
Examples
# Configure GigabitEthernet 0/1 as a PIM domain border.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 bsr-boundary
Related commands
• c-bsr
• multicast ipv6 boundary
pim ipv6 dm
Use pim ipv6 dm to enable IPv6 PIM-DM.
Use undo pim ipv6 dm to disable IPv6 PIM-DM.
Syntax
pim ipv6 dm
undo pim ipv6 dm
Default
IPv6 PIM-DM is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command can take effect only after IPv6 multicast routing is enabled on the device.
IPv6 PIM-DM cannot be used for IPv6 multicast groups in the IPv6 SSM group range.
Examples
# Enable IPv6 multicast routing, and enable IPv6 PIM-DM on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 dm
Related commands
• multicast ipv6 routing-enable
• pim ipv6 sm
• ssm-policy