HP VPN Firewall Appliances Network Management Command Reference

999
pim ipv6 hello-option dr-priority
Use pim ipv6 hello-option dr-priority to configure the router priority for DR election on the current
interface.
Use undo pim ipv6 hello-option dr-priority to restore the default.
Syntax
pim ipv6 hello-option dr-priority priority
undo pim ipv6 hello-option dr-priority
Default
The router priority for DR election is 1.
Views
Interface view
Default command level
2: System level
Parameters
priority: Specifies a router priority for DR election, in the range of 0 to 4294967295. A larger value
indicates a higher priority.
Examples
# Set the router priority for DR election to 3 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option dr-priority 3
Related commands
hello-option dr-priority
pim ipv6 hello-option holdtime
Use pim ipv6 hello-option holdtime to configure the PIM neighbor timeout timer on the current interface.
Use undo pim ipv6 hello-option holdtime to restore the default.
Syntax
pim ipv6 hello-option holdtime interval
undo pim ipv6 hello-option holdtime
Default
The IPv6 PIM neighbor timeout timer is 105 seconds.
Views
Interface view
Default command level
2: System level