HP VPN Firewall Appliances Network Management Command Reference

1000
Parameters
interval: Specifies an IPv6 PIM neighbor timeout timer in seconds. The value ranges from 1 to 65535. A
value of 65535 makes the PIM neighbor always reachable.
Examples
# Set the IPv6 PIM neighbor timeout timer to 120 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option holdtime 120
Related commands
hello-option holdtime
pim ipv6 hello-option lan-delay
Use pim ipv6 hello-option lan-delay to configure the LAN-delay time( namely, the time that the device
waits before forwarding a received prune message, on the current interface).
Use undo pim ipv6 hello-option lan-delay to restore the default.
Syntax
pim ipv6 hello-option lan-delay interval
undo pim ipv6 hello-option lan-delay
Default
The LAN-delay time is 500 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a LAN-delay time in milliseconds. The value ranges from 1 to 32767.
Examples
# Set the LAN-delay time to 200 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option lan-delay 200
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim ipv6 hello-option override-interval