HP VPN Firewall Appliances Network Management Command Reference

1001
pim ipv6 hello-option neighbor-tracking
Use pim ipv6 hello-option neighbor-tracking to disable join suppression (namely, enable neighbor
tracking) on the current interface.
Use undo pim ipv6 hello-option neighbor-tracking to enable join suppression.
Syntax
pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking
Default
Join suppression is enabled. Namely, neighbor tracking is disabled.
Views
Interface view
Default command level
2: System level
Examples
# Disable join suppression on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option neighbor-tracking
Related commands
hello-option neighbor-tracking
pim ipv6 hello-option override-interval
Use pim ipv6 hello-option override-interval to configure the prune override interval on the current
interface.
Use undo pim ipv6 hello-option override-interval to restore the default.
Syntax
pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
Default
The prune override interval is 2500 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a prune override interval in milliseconds. The value ranges from 1 to 65535.