HP VPN Firewall Appliances Network Management Command Reference

1002
Examples
# Set the prune override interval to 2000 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0//1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option override-interval 2000
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim ipv6 hello-option lan-delay
pim ipv6 holdtime assert
Use pim ipv6 holdtime assert to configure the assert timeout timer on the current interface.
Use undo pim ipv6 holdtime assert to restore the default.
Syntax
pim ipv6 holdtime assert interval
undo pim ipv6 holdtime assert
Default
The assert timeout timer is 180 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds. The value ranges from 7 to 2147483647.
Examples
# Set the assert timeout timer to 100 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 holdtime assert 100
Related commands
• holdtime assert
• holdtime join-prune
• pim ipv6 holdtime join-prune
pim ipv6 holdtime join-prune
Use pim ipv6 holdtime join-prune to configure the join/prune timeout timer on the interface.
Use undo pim ipv6 holdtime join-prune to restore the default.