HP VPN Firewall Appliances Network Management Command Reference

1003
Syntax
pim ipv6 holdtime join-prune interval
undo pim ipv6 holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds. The value ranges from 1 to 65535.
Examples
# Set the join/prune timeout timer to 280 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 holdtime join-prune 280
Related commands
• holdtime assert
• holdtime join-prune
• pim ipv6 holdtime assert
pim ipv6 neighbor-policy
Use pim ipv6 neighbor-policy to configure a legal source address range for hello messages to guard
against hello message spoofing.
Use undo pim ipv6 neighbor-policy to restore the default.
Syntax
pim ipv6 neighbor-policy acl6-number
undo pim ipv6 neighbor-policy
Default
No source address range for hello messages is configured. That is, all the received hello messages are
considered legal.
Views
Interface view
Default command level
2: System level