HP VPN Firewall Appliances Network Management Command Reference

1005
Default
IPv6 PIM-SM is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command can take effect only after IPv6 multicast routing is enabled on the device.
Examples
# Enable IPv6 multicast routing, and enable IPv6 PIM-SM on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 sm
Related commands
• multicast ipv6 routing-enable
• pim ipv6 dm
pim ipv6 state-refresh-capable
Use pim ipv6 state-refresh-capable to enable the state refresh feature on the interface.
Use undo pim ipv6 state-refresh-capable to disable the state refresh feature.
Syntax
pim ipv6 state-refresh-capable
undo pim ipv6 state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Default command level
2: System level
Examples
# Disable state refresh on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] undo pim ipv6 state-refresh-capable
Related commands
• state-refresh-hoplimit
• state-refresh-interval