HP VPN Firewall Appliances Network Management Command Reference

1018
timer hello (IPv6 PIM view)
Use timer hello to configure the hello interval globally.
Use undo timer hello to restore the default.
Syntax
timer hello interval
undo timer hello
Default
Hello messages are sent at the interval of 30 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a hello interval in seconds. The value ranges from 1 to 2147483647.
Examples
# Set the global hello interval to 40 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer hello 40
Related commands
pim ipv6 timer hello
timer join-prune (IPv6 PIM view)
Use timer join-prune to configure the join/prune interval globally.
Use undo timer join-prune to restore the default.
Syntax
timer join-prune interval
undo timer join-prune
Default
The join/prune interval is 60 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a join/prune interval in seconds. The value ranges from 1 to 2147483647.