HP VPN Firewall Appliances Network Management Command Reference

1020
MLD commands
The term "router" in this document refers to both routers and routing-capable firewalls.
display mld group
Use display mld group to display MLD group information.
Syntax
display mld group [ ipv6-group-address | interface interface-type interface-number ] [ static | verbose ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-address: Specifies an MLD group address, in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number in the range of 0
to F. If you do not specify any IPv6 multicast group address, this command displays information about all
MLD groups.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify interface-type interface-number, the command displays information about the MLD groups that
all interfaces joined.
static: Specifies MLD groups that the interfaces statically joined. If you do not specify this keyword, the
command displays the MLD groups that the interfaces dynamically joined.
verbose: Displays detailed information of MLD groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display detailed information about MLD groups that all interfaces dynamically joined.
<Sysname> display mld group verbose
Interface group report information
GigabitEthernet0/1(FE80::101)
Total 1 MLD Groups reported
Group: FF03::101
Uptime: 00:01:46