HP VPN Firewall Appliances Network Management Command Reference

1025
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-address: Specifies an MLD proxying group. The group address is in the form of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, through FF0y::), where x and y represent any hexadecimal
number in the range of 0 to F. If this argument is not specified, this command displays information about
all MLD proxying groups.
verbose: Displays the detailed MLD proxying group information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the MLD proxying group information of all interfaces.
<Sysname> display mld proxying group verbose
Proxying group record(s) information
Total 1 MLD-Proxying group record(s)
Group: FF03::101
Group mode: include
Member state: Delay
Expires: 00:00:02
Source list (total 1 source(s))
Source: 30::1
Table 236 Command output
Field Descri
p
tion
Proxying group record(s) information Information of MLD proxying groups on the interfaces.
Total 1 MLD-Proxying group record(s) One MLD proxying group is recorded.
Group IPv6 multicast group address.
Member state
State of the member hosts:
• Delay.
• Idle.
Expires
Remaining time of the IPv6 multicast group, where "off"
means that the group never times out.