HP VPN Firewall Appliances Network Management Command Reference

1026
Field Descri
p
tion
Group mode
IPv6 multicast source filtering modes:
• Include.
• Exclude.
Source list
A list of IPv6 multicast sources that the hosts want to receive
information from.
display mld routing-table
Use display mld routing-table to display information about the MLD routing table.
Syntax
display mld routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] |
flags { act | suc } ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source by its IPv6 address.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal number in the range of 0 to F.
prefix-length: Specifies the prefix length of the multicast source or multicast group address. For a multicast
source address, this argument has an effective value range of 0 to 128. For a multicast group address,
it has an effective value range of 8 to 128. The system default is 128 in both cases.
flags: Specifies the route flag.
act: Displays the MLD routes with the ACT flag
suc: Displays the MLD routes with the SUC flag.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the MLD routing table.
<Sysname> display mld routing-table
Routing table
Total 2 entries
00001. (*, FF1E::101)