HP VPN Firewall Appliances Network Management Command Reference

1030
Field Descri
p
tion
Source IPv6 multicast source address.
Last-listener-query-counter Number of MLD last listener queries sent.
Last-listener-query-timer-expiry
Remaining time of the MLD last listener query timer, where
"off" means that the timer never expires.
display mld ssm-mapping host interface
Use display mld ssm-mapping host interface to display information about the hosts that join based on
the MLD SSM mappings on the specified interface.
Syntax
display mld ssm-mapping host interface interface-type interface-number group ipv6-group-address
source ipv6-source-address [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
group ipv6-group-address: Specifies an IPv6 multicast group. The value of ipv6-group-address is in the
range of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent
any hexadecimal number in the range of 0 to F.
source ipv6-source-address: Specifies an IPv6 multicast source.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the hosts that join multicast source group (10::1, FF1E::101) based on the
MLD SSM mappings on GigabitEthernet 0/1.
<Sysname> display mld ssm-mapping host interface gigabitethernet 0/1 group ff1e::101
source 10::1
GigabitEthernet0/1(1::1):
(10::1, FF1E::101)
Host Uptime Expires
1::1 00:02:20 00:00:40
2::2 00:02:21 00:00:39