HP VPN Firewall Appliances Network Management Command Reference

1031
Table 240 Command output
Field Descri
p
tion
GigabitEthernet0/1(1::1) Interface and IPv6 address.
(10::1, FF1E::101) (S, G) entry.
Host Host IPv6 address.
Uptime Host running duration.
Expires Host expiration time, where timeout means that the host has expired.
fast-leave (MLD view)
Use fast-leave to configure MLD fast-leave processing globally.
Use undo fast-leave to disable MLD fast-leave processing globally.
Syntax
fast-leave [ group-policy acl6-number ]
undo fast-leave
Default
MLD fast-leave processing is disabled. That is, the MLD querier sends multicast-address-specific queries
or multicast-address-and-source-specific queries after receiving an MLD done message from a host,
instead of sending a leave notification directly to the upstream.
Views
MLD view
Default command level
2: System level
Parameters
acl6-number: Specifies a basic IPv6 ACL, in the range of 2000 to 2999. The fast-leave processing
function is effective only for the IPv6 multicast groups that match the permit statement in the ACL. If you
do not include this option in your command, this command takes effect for all IPv6 multicast groups.
Examples
# Enable MLD fast-leave processing globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] fast-leave
Related commands
• last-listener-query-interval
• mld fast-leave
host-tracking (MLD view)
Use host-tracking to enable the MLD host tracking function globally.