HP VPN Firewall Appliances Network Management Command Reference

1034
Views
System view
Default command level
2: System level
Usage guidelines
This command can take effect only after IPv6 multicast routing is enabled on the device.
Examples
# Enable IPv6 multicast routing and enter MLD view.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] mld
[Sysname-mld]
Related commands
• mld enable
• multicast ipv6 routing-enable
mld enable
Use mld enable to enable MLD on the current interface.
Use undo mld enable to disable MLD on the current interface.
Syntax
mld enable
undo mld enable
Default
MLD is disabled on the current interface.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command can take effect only after IPv6 multicast routing is enabled on the device.
Other MLD configurations performed on the interface can take effect only after MLD is enabled on the
interface.
Examples
# Enable IPv6 multicast routing and enable MLD on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld enable