HP VPN Firewall Appliances Network Management Command Reference

1038
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld host-tracking
Related commands
host-tracking
mld last-listener-query-interval
Use mld last-listener-query-interval to configure the MLD last listener query interval on the current
interface.
Use undo mld last-listener-query-interval to restore the default.
Syntax
mld last-listener-query-interval interval
undo mld last-listener-query-interval
Default
The MLD last listener query interval is 1 second.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD last listener query interval in seconds, in the range of 1 to 5.
Examples
# Set the MLD last listener query interval to 3 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld last-listener-query-interval 3
Related commands
• display mld interface
• last-listener-query-interval
• mld robust-count
mld max-response-time
Use mld max-response-time to configure the maximum response time for MLD general query messages
on the interface.
Use undo mld max-response-time to restore the default.
Syntax
mld max-response-time interval
undo mld max-response-time