HP VPN Firewall Appliances Network Management Command Reference

1042
• The number of multicast-address-and-source-specific queries the MLDv2 querier sends after
receiving an MLD report that indicates relation changes between IPv6 multicast groups and IPv6
multicast sources.
Examples
# Set the MLD querier's robustness variable to 3 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld robust-count 3
Related commands
• display mld interface
• mld last-listener-query-interval
• mld startup-query-count
• mld timer other-querier-present
• mld timer query
• robust-count
mld send-router-alert
Use mld send-router-alert to enable insertion of the Router-Alert option into MLD messages to be sent
from the current interface.
Use undo mld send-router-alert to disable insertion of the Router-Alert option into MLD messages to be
sent from the current interface.
Syntax
mld send-router-alert
undo mld send-router-alert
Default
MLD messages carry the Router-Alert option.
Views
Interface view
Default command level
2: System level
Examples
# Disable insertion of the Router-Alert option into MLD messages to be sent from GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] undo mld send-router-alert
Related commands
• mld require-router-alert
• send-router-alert