HP VPN Firewall Appliances Network Management Command Reference

1043
mld ssm-mapping enable
Use mld ssm-mapping enable to enable the MLD SSM mapping feature on the current interface.
Use undo mld ssm-mapping enable to disable the MLD SSM mapping feature on the current interface.
Syntax
mld ssm-mapping enable
undo mld ssm-mapping enable
Default
The MLD SSM mapping feature is disabled on all interfaces.
Views
Interface view
Default command level
2: System level
Examples
# Enable the MLD SSM mapping feature on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld ssm-mapping enable
mld startup-query-count
Use mld startup-query-count to configure the startup query count on the current interface.
Use undo mld startup-query-count to restore the default.
Syntax
mld startup-query-count value
undo mld startup-query-count
Default
The startup query count is set to the MLD querier's robustness variable.
Views
Interface view
Default command level
2: System level
Parameters
value: Specifies a startup query count, namely, the number of queries that the MLD querier sends on
startup, in the range of 2 to 5.
Examples
# Set the startup query count to 3 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1