HP VPN Firewall Appliances Network Management Command Reference

1044
[Sysname-GigabitEthernet0/1] mld startup-query-count 3
Related commands
• mld robust-count
• startup-query-count
mld startup-query-interval
Use mld startup-query-interval to configure the startup query interval on the current interface.
Use undo mld startup-query-interval to restore the default.
Syntax
mld startup-query-interval interval
undo mld startup-query-interval
Default
The startup query interval is 1/4 of the MLD query interval.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a startup query interval in seconds, namely, the interval between general queries that
the MLD querier sends on startup, in the range of 1 to 18000.
Examples
# Set the startup query interval to 5 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld startup-query-interval 5
Related commands
• mld timer query
• startup-query-interval
mld static-group
Use mld static-group to configure the current interface as a static member of the specified IPv6 multicast
group or the specified IPv6 multicast source and group.
Use undo mld static-group to remove the configuration.
Syntax
mld static-group ipv6-group-address [ source ipv6-source-address ]
undo mld static-group { all | ipv6-group-address [ source ipv6-source-address ] }