HP VPN Firewall Appliances Network Management Command Reference

1046
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD other querier present interval in seconds, in the range of 60 to 300.
Examples
# Set the MLD other querier present interval to 200 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld timer other-querier-present 200
Related commands
• display mld interface
• mld max-response-time
• mld robust-count
• mld timer query
• timer other-querier-present
mld timer query
Use mld timer query to configure the MLD query interval on the current interface.
Use undo mld timer query to restore the default.
Syntax
mld timer query interval
undo mld timer query
Default
The MLD query interval is 125 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD query interval in seconds, namely, the time between MLD general query
messages, in the range of 1 to 18000.
Examples
# Set the MLD query interval to 200 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld timer query 200