Manualshelf

HP VPN Firewall Appliances Network Management Command Reference

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
1071107210731074107510761077107810791080
1047
Related commands
• display mld interface
• mld timer other-querier-present
• timer query
mld version
Use mld version to configure the MLD version on the current interface.
Use undo mld version to restore the default MLD version.
Syntax
mld version version-number
undo mld version
Default
The MLD version is MLDv1.
Views
Interface view
Default command level
2: System level
Parameters
version-number: Specifies an MLD version, 1 or 2.
Examples
# Set the MLD version to MLDv2 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld version 2
Related commands
version
require-router-alert (MLD view)
Use require-router-alert to globally configure the device to discard MLD messages without the
Router-Alert option.
Use undo require-router-alert to restore the default.
Syntax
require-router-alert
undo require-router-alert
Default
The device does not check the Router-Alert option. That is, it forwards all received MLD messages to the
upper layer protocol for processing.