HP VPN Firewall Appliances Network Management Command Reference

1051
undo send-router-alert
Default
MLD messages carry the Router-Alert option.
Views
MLD view
Default command level
2: System level
Examples
# Disable insertion of the Router-Alert option into MLD messages to be sent.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] undo send-router-alert
Related commands
• mld send-router-alert
• require-router-alert
ssm-mapping (MLD view)
Use ssm-mapping to configure an MLD SSM mapping.
Use undo ssm-mapping to remove one or all MLD SSM mappings.
Syntax
ssm-mapping ipv6-group-address prefix-length ipv6-source-address
undo ssm-mapping { ipv6-group-address prefix-length ipv6-source-address | all }
Default
No MLD SSM mappings are configured.
Views
MLD view
Default command level
2: System level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal number in the range of 0 to F.
prefix-length: Specifies the prefix length of the IPv6 multicast group address, in the range of 8 to 128.
ipv6-source-address: Specifies a multicast source by its IPv6 address.
all: Specifies all MLD SSM mappings.
Examples
# Configure an MLD SSM mapping for multicast groups in the range of FF1E::/64 and multicast source
1: :1.
<Sysname> system-view