HP VPN Firewall Appliances Network Management Command Reference

1052
[Sysname] mld
[Sysname-mld] ssm-mapping ff1e:: 64 1::1
Related commands
• display mld ssm-mapping
• mld ssm-mapping enable
startup-query-count (MLD view)
Use startup-query-count to configure the startup query count globally.
Use undo startup-query-count to restore the default.
Syntax
startup-query-count value
undo startup-query-count
Default
The startup query count is set to the MLD querier's robustness variable.
Views
MLD view
Default command level
2: System level
Parameters
value: Specifies a startup query count, namely, the number of queries that the MLD querier sends on
startup, in the range of 2 to 5.
Examples
# Set the startup query count to 3 globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-count 3
Related commands
• mld startup-query-count
• robust-count
startup-query-interval (MLD view)
Use startup-query-interval to configure the startup query interval globally.
Use undo startup-query-interval to restore the default.
Syntax
startup-query-interval interval
undo startup-query-interval