HP VPN Firewall Appliances Network Management Command Reference

1053
Default
The startup query interval is 1/4 of the "MLD query interval".
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies a startup query interval in seconds, namely, the interval between general queries that
the MLD querier sends on startup, in the range of 1 to 18000.
Examples
# Set the startup query interval to 5 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-interval 5
Related commands
• mld startup-query-interval
• timer query
timer other-querier-present (MLD view)
Use timer other-querier-present to configure the MLD other querier present interval globally.
Use undo timer other-querier-present to restore the default.
Syntax
timer other-querier-present interval
undo timer other-querier-present
Default
MLD other querier present interval = [ MLD query interval ] × [ MLD querier's robustness variable ] +
[ maximum response delay for MLD general queries ] /2.
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies an MLD other querier present interval in seconds, in the range of 60 to 300.
Examples
# Set the MLD other querier present interval to 200 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] timer other-querier-present 200