HP VPN Firewall Appliances Network Management Command Reference

1061
• 32-bit AS number: 16-bit self-defined number, for example, 70000:3. The AS number must be no
less than 65536.
&<1-16>: Indicates that the argument before it can be entered up to 16 times.
additive: Adds the specified attribute to the original RT community attribute.
Examples
# Configure node 10 in permit mode of routing policy policy1. If a BGP route matches AS path list 1, add
the RT extended community attribute 100:2 to the route.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply extcommunity rt 100:2 additive
# Configure node 10 in permit mode of routing policy policy2. If a BGP route matches AS path list 2, add
the SoO extended community attribute 100:3 to the route.
<Sysname> system-view
[Sysname] route-policy policy2 permit node 10
[Sysname-route-policy] if-match as-path 2
[Sysname-route-policy] apply extcommunity soo 100:3 additive
apply isis
Use apply isis to redistribute routes into a specified IS-IS level.
Use undo apply isis to remove the clause configuration.
Syntax
apply isis { level-1 | level-1-2 | level-2 }
undo apply isis
Default
No IS-IS level is set.
Views
Routing policy view
Default command level
2: System level
Parameters
level-1: Redistributes routes into IS-IS level-1.
level-1-2: Redistributes routes into both IS-IS level-1 and level-2.
level-2: Redistributes routes into IS-IS level-2.
Usage guidelines
The following matrix shows the apply isis command and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No