HP VPN Firewall Appliances Network Management Command Reference

1065
Use undo apply preferred-value to remove the clause configuration.
Syntax
apply preferred-value preferred-value
undo apply preferred-value
Default
No preferred value is set for BGP routes.
Views
Routing policy view
Default command level
2: System level
Parameters
preferred-value: Preferred value, in the range of 0 to 65535.
Examples
# Configure node 10 in permit mode of routing policy policy1. Set a preferred value of 66 for BGP
routing information matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply preferred-value 66
apply tag
Use apply tag to set a specified tag for RIP, OSPF, or IS-IS routing information.
Use undo apply tag to remove the clause configuration.
Syntax
apply tag value
undo apply tag
Default
No routing tag is set for RIP, OSPF, or IS-IS routing information.
Views
Routing policy view
Default command level
2: System level
Parameters
value: Tag value, in the range of 0 to 4294967295.
Usage guidelines
Only F5000 firewalls support this command.