HP VPN Firewall Appliances Network Management Command Reference

84
• If you do not specify any port, this command displays the BPDU statistics of on all ports. The
displayed information is sorted by port name.
• If you specify a port, this command displays the BPDU statistics on the port.
Examples
# In MSTP mode, display the BPDU statistics of all MSTIs on GigabitEthernet 0/1.
<Sysname> display stp bpdu-statistics interface gigabitethernet 0/1
Port: GigabitEthernet0/1
Instance-independent:
Type Count Last Updated
--------------------------- ---------- -----------------
Invalid BPDUs 0
Looped-back BPDUs 0
MAX-aged BPDUs 0
TCN sent 0
TCN received 0
TCA sent 0
TCA received 2 10:33:12 01/13/2010
Config sent 0
Config received 0
RST sent 0
RST received 0
MST sent 4 10:33:11 01/13/2010
MST received 151 10:37:43 01/13/2010
Instance 0:
Type Count Last Updated
--------------------------- ---------- -----------------
Timeout BPDUs 0
MAX-hoped BPDUs 0
TC detected 1 10:32:40 01/13/2010
TC sent 3 10:33:11 01/13/2010
TC received 0
Instance 1:
Type Count Last Updated
--------------------------- ---------- -----------------
Timeout BPDUs 0
MAX-hoped BPDUs 0
TC detected 0
TC sent 0
TC received 0
Instance 2: