HP VPN Firewall Appliances Network Management Command Reference

1074
Default command level
2: System level
Parameters
external-type1: Matches OSPF Type 1 external routes.
external-type1or2: Matches OSPF Type 1 or 2 external routes.
external-type2: Matches OSPF Type 2 external routes.
internal: Matches internal routes (OSPF intra-area and inter-area routes).
is-is-level-1: Matches IS-IS Level-1 routes.
is-is-level-2: Matches IS-IS Level-2 routes.
The following matrix shows the keywords is-is-level-1 and is-is-level-2 and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
nssa-external-type1: Matches OSPF NSSA Type 1 external routes.
nssa-external-type1or2: Matches OSPF NSSA Type 1 or 2 external routes.
nssa-external-type2: Matches OSPF NSSA Type 2 external routes.
Examples
# Configure node 10 in permit mode of routing policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type internal
if-match tag
Use if-match tag to match routing information having the specified tag.
Use undo if-match tag to remove the match criterion.
Syntax
if-match tag value
undo if-match tag
Default
No tag match criterion is configured.
Views
Routing policy view