HP VPN Firewall Appliances Network Management Command Reference

1084
Examples
# Clear the statistics for IPv4 prefix list abc.
<Sysname> reset ip ip-prefix abc
IPv6 routing policy commands
apply ipv6 next-hop
Use apply ipv6 next-hop to configure a next hop for IPv6 routes.
Use undo apply ipv6 next-hop to remove the clause configuration.
Syntax
apply ipv6 next-hop ipv6-address
undo apply ipv6 next-hop
Default
No next hop address is configured for IPv6 routing information.
Views
Routing policy view
Default command level
2: System level
Parameters
ipv6-address: Next hop IPv6 address.
Usage guidelines
This command cannot set a next hop for redistributed routes.
Examples
# Configure node 10 of routing policy policy1 to configure next hop 3ffe:506::1 for IPv6 routes matching
AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply ipv6 next-hop 3ffe:506::1
display ip ipv6-prefix
Use display ip ipv6-prefix to display IPv6 prefix list statistics.
Syntax
display ip ipv6-prefix [ ipv6-prefix-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view