HP VPN Firewall Appliances Network Management Command Reference

89
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# In MSTP mode, display the root bridge information of all spanning trees.
<Sysname> display stp root
MSTID Root Bridge ID ExtPathCost IntPathCost Root Port
0 0.00e0-fc0e-6554 200200 0 GigabitEthernet0/1
Table 23 Command output
Field Descri
p
tion
ExtPathCost
External path cost. The device automatically calculates the default path cost of a
port. Otherwise, you can use the stp cost command to configure the path cost of
a port.
IntPathCost
Internal path cost. The device automatically calculates the default path cost of a
port. Otherwise, you can use the stp cost command to configure the path cost of
a port.
Root Port Root port name (displayed only if a port of the device is the root port of MSTIs).
display stp tc
Use display stp tc to display the statistics of TC/TCN BPDUs received and sent by all ports in an MSTI or
all MSTIs.
Syntax
display stp [ instance instance-id ] tc [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
0: Visit level
Parameters
instance instance-id: Displays the statistics of TC/TCN BPDUs received and sent by all ports in a
particular MSTI. For the value range for instance-id, see "instance." 0 represents the CI
ST.