HP VPN Firewall Appliances Network Management Command Reference

120
Views
Interface view
Default command level
2: System level
Usage guidelines
Only dialer interfaces support this command.
By default, dialer interfaces use PPP as the link layer protocol.
The following matrix shows the link-protocol ppp command and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI Yes
F1000-E No
F5000 No
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
Examples
# Enable PPP encapsulation on Dialer 1.
<Sysname> system-view
[Sysname] interface Dialer 1
[Sysname-Dialer1] link-protocol ppp
ppp account-statistics enable
Use ppp account-statistics enable to enable PPP traffic statistics collection.
Use undo ppp account-statistics enable to disable PPP traffic statistics collection.
Syntax
ppp account-statistics enable [ acl { acl-number | name acl-name } ]
undo ppp account-statistics enable
Default
PPP traffic statistics collection is disabled.
Views
Interface view
Default command level
2: System level
Parameters
acl: Generates PPP accounting statistics for traffic that matches the configured ACL. If no ACL is
configured, the device generates PPP accounting statistics for all traffic.