HP VPN Firewall Appliances Network Management Command Reference

138
Physical is MP, baudrate: 64000 bps
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last 300 seconds input: 0 bytes/sec 0 packets/sec
Last 300 seconds output: 0 bytes/sec 0 packets/sec
520 packets input, 44132 bytes, 0 drops
527 packets output, 44566 bytes, 4 drops
interface virtual-template
Use interface virtual-template to create a VT interface and enter its view. If the VT interface already exists,
enter its view directly.
Use undo interface virtual-template to remove a VT interface.
Syntax
interface virtual-template number
undo interface virtual-template number
Views
System view
Default command level
2: System level
Parameters
number: VT interface number, in the range of 0 to 1023.
Usage guidelines
To remove a VT interface, make sure all the corresponding VA interfaces are removed and the VT
interface is not in use.
Examples
# Create interface VT 10.
<Sysname> system-view
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10]
mtu
Use mtu to set the MTU size of the interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of an interface is 1500 bytes.