HP VPN Firewall Appliances Network Management Command Reference

172
m-node: Specifies the mixed node. An m-node client broadcasts the destination name, and if receiving
no response, then unicasts the destination name to the WINS server to get the mapping.
p-node: Specifies the peer-to-peer node. A p-node client sends the destination name in a unicast
message to get the mapping from the WINS server.
Examples
# Specify the NetBIOS node type as b-node in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] netbios-type b-node
Related commands
• dhcp server ip-pool
• nbns-list
• display dhcp server tree
network
Use network to specify the subnet for dynamic allocation in a DHCP address pool.
Use undo network to remove the specified subnet.
Syntax
network network-address [ mask-length | mask mask ]
undo network
Default
No subnet is specified.
Views
DHCP address pool view
Default command level
2: System level
Parameters
network-address: Subnet for dynamic allocation. If no mask length and mask is specified, the natural
mask is used.
mask-length: Mask length in the range of 1 to 30.
mask mask: Specifies the IP address network mask in dotted decimal format.
Usage guidelines
You can specify only one subnet for each common address pool. If you use the network command
multiple times, the most recent configuration takes effect.
Examples
# Specify 192.168.8.0/24 as the subnet for dynamic allocation in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] network 192.168.8.0 mask 255.255.255.0