HP VPN Firewall Appliances Network Management Command Reference

174
• display dhcp server tree
network mask
Use network mask to specify the IP address mask for dynamic allocation in an extended address pool.
Use undo network mask to remove the specified IP address mask.
Syntax
network mask mask
undo network mask
Default
No IP address mask is specified.
Views
DHCP extended address pool view
Default command level
2: System level
Parameters
mask: Network mask in dotted decimal notation.
Usage guidelines
Only the extended address pools support this command.
If you specify an IP address range for an extended address pool without an IP address mask, the
extended address pool is not valid, and therefore the system cannot assign IP addresses from the
extended address pool.
Examples
# Specify 255.255.255.0 as the IP address mask for dynamic allocation in extended address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0 extended
[Sysname-dhcp-pool-0] network mask 255.255.255.0
Related commands
• dhcp server ip-pool
• display dhcp server tree
• network ip range
next-server
Use next-server to specify the IP address of a server in a DHCP address pool.
Use undo next-server to remove the server's IP address from the DHCP address pool.
Syntax
next-server ip-address
undo next-server