HP VPN Firewall Appliances Network Management Command Reference

178
Views
DHCP address pool view
Default command level
2: System level
Parameters
client-identifier: The client ID of a static binding, a string with 4 to 160 characters in the format of H-H-H…,
each H indicates 4 hex digits except the last H indicates 2 or 4 hex digits. For example, aabb-cccc-dd
is a valid ID, but aabb-c-dddd and aabb-cc-dddd are both invalid.
Usage guidelines
Use the static-bind client-identifier command together with the static-bind ip-address command to
accomplish a static binding configuration.
The ID of the static binding of a client must be identical to the ID displayed by using the display dhcp
client verbose command on the client. Otherwise, the client cannot obtain an IP address.
If you use the static-bind client-identifier or static-bind mac-address command multiple times, the most
recent configuration takes effect.
Examples
# Bind the client ID aaaa-bbbb to the IP address 10.1.1.1 with the mask 255.255.255.0 in DHCP address
pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind client-identifier aaaa-bbbb
Related commands
• dhcp server ip-pool
• static-bind ip-address
• static-bind mac-address
• display dhcp server tree
• display dhcp client verbose
static-bind ip-address
Use static-bind ip-address to specify an IP address in a DHCP address pool for a static binding.
Use undo static-bind ip-address to remove the statically bound IP address.
Syntax
static-bind ip-address ip-address [ mask-length | mask mask ]
undo static-bind ip-address
Default
No IP address is statically bound in a DHCP address pool.
Views
DHCP address pool view