HP VPN Firewall Appliances Network Management Command Reference

179
Default command level
2: System level
Parameters
ip-address: Specifies the IP address of a static binding. If no mask and mask length is specified, the
natural mask is used.
mask-length: Specifies the mask length of the IP address, in the range of 1 to 30.
mask mask: Specifies the IP address mask, in dotted decimal format.
Usage guidelines
Use the static-bind ip-address command together with the static-bind mac-address or static-bind
client-identifier command to accomplish a static binding configuration.
The IP address of the static binding cannot be an interface address of the DHCP server. Otherwise, an
IP address conflict might occur, and the bound client cannot obtain an IP address correctly.
If you use the static-bind ip-address command multiple times, the most recent configuration takes effect.
Examples
# Bind the client MAC address 0000-e03f-0305 to the IP address 10.1.1.1 with the mask 255.255.255.0
in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind mac-address 0000-e03f-0305
Related commands
• dhcp server ip-pool
• static-bind client-identifier
• static-bind mac-address
• display dhcp server tree
static-bind mac-address
Use static-bind mac-address to statically bind a MAC address to an IP address in a DHCP address pool.
Use undo static-bind mac-address to remove the statically bound MAC address.
Syntax
static-bind mac-address mac-address
undo static-bind mac-address
Default
No MAC address is statically bound.
Views
DHCP address pool view
Default command level
2: System level