HP VPN Firewall Appliances Network Management Command Reference

198
Table 38 Command output
Field Descri
p
tion
Interface Interface name.
Status Option 82 state: Enable or Disable.
Strategy
Handling strategy for requesting messages containing Option 82, Drop,
Keep, or Replace.
Format Padding format of Option 82, Normal or Verbose.
Circuit ID format-type Non-user-defined code type of the circuit ID sub-option, ASCII or HEX.
Remote ID format-type Non-user-defined code type of the remote ID sub-option, ASCII or HEX.
Node identifier Access node identifier.
User defined Content of user-defined sub-options.
Circuit ID User-defined padding content of the circuit ID sub-option.
Remote ID User-defined padding content of the remote ID sub-option.
display dhcp relay security
Use display dhcp relay security to display information about bindings of DHCP relay agents. If you do
not specify any parameter, this command displays information about all bindings.
Syntax
display dhcp relay security [ ip-address | dynamic | static ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: Displays the binding information about an IP address.
dynamic: Displays information about dynamic bindings.
static: Displays information about static bindings.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Enable address check or authorized ARP support on the DHCP relay agent before it can generate
dynamic client entries.