HP VPN Firewall Appliances Network Management Command Reference

221
Examples
# Display information about the DDNS policy named steven_policy.
<Sysname> display ddns policy steven_policy
DDNS policy: steven_policy
URL : http://steven:[e-mail]/dyndns/update?
system=dyndns&hostname=<h>&myip=<a>
SSL client policy:
Interval : 1 days 0 hours 1 minutes
Table 48 Command output
Field Descri
p
tion
DDNS policy DDNS policy name.
URL URL address for the DDNS service. This field is blank if no URL address is configured.
SSL client policy
Name of the associated SSL client policy. This field is blank if no associated SSL client
policy is configured.
Interval Interval for sending DDNS update requests.
interval
Use interval to specify the interval for sending DDNS update requests after DDNS update is enabled.
Use undo interval to restore the default value.
Syntax
interval days [ hours [ minutes ] ]
undo interval
Default
The DDNS update request interval is one hour.
Views
DDNS policy view
Default command level
2: System level
Parameters
days: Days in the range of 0 to 365.
hours: Hours in the range of 0 to 23.
minutes: Minutes in the range of 0 to 59.
Usage guidelines
A DDNS update request is initiated immediately after the primary IP address of the interface changes or
the link state of the interface changes from down to up, no matter whether the interval is reached.
If you specify the interval as 0, your device only initiates a DDNS update request when the primary IP
address of the interface is changed or the link state of the interface changes from down to up.