HP VPN Firewall Appliances Network Management Command Reference

227
Related commands
• reset arp
• display arp
arp timer aging
Use arp timer aging to set the aging timer for dynamic ARP entries.
Use undo arp timer aging to restore the default.
Syntax
arp timer aging aging-time
undo arp timer aging
Default
The aging timer for dynamic ARP entries is 20 minutes.
Views
System view
Default command level
2: System level
Parameters
aging-time: Specifies the aging time for dynamic ARP entries in minutes. The value range is 1 to 1440.
Examples
# Set aging timer for dynamic ARP entries to 10 minutes.
<Sysname> system-view
[Sysname] arp timer aging 10
Related commands
display arp timer aging
display arp
Use display arp to display ARP entries.
Syntax
display arp [ [ all | dynamic | static ] | vlan vlan-id | interface interface-type interface-number ] [ count
| verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.