HP VPN Firewall Appliances Network Management Command Reference

237
Views
Any view
Default command level
2: System level
Parameters
interface interface-type interface-number: Displays the proxy ARP status of the interface specified by the
argument interface-type interface-number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you specify an interface, this command displays proxy ARP status of the specified interface. If you do
not specify any interface, this command displays proxy ARP status of all interfaces.
Examples
# Display the proxy ARP status on GigabitEthernet 0/1.
<Sysname> display proxy-arp interface gigabitethernet 0/1
Interface GigabitEthernet 0/1
Proxy ARP status: disabled
Related commands
proxy-arp enable
local-proxy-arp enable
Use local-proxy-arp enable to enable local proxy ARP.
Use undo local-proxy-arp enable to disable local proxy ARP.
Syntax
local-proxy-arp enable [ ip-range startIP to endIP ]
undo local-proxy-arp enable
Default
Local proxy ARP is disabled.
Views
VLAN interface view, Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view, Layer 3
aggregate interface view, Layer 3 aggregate subinterface view
Default command level
2: System level