HP VPN Firewall Appliances Network Management Command Reference

1
Ethernet interface commands
General Ethernet interface and subinterface
commands
combo enable
Use combo enable to activate the copper or fiber combo port.
Syntax
combo enable { copper | fiber }
Default
The copper combo port is activated.
Views
Ethernet interface view (combo interface)
Default command level
2: System level
Parameters
copper: Activates the copper(electrical) combo port.
fiber: Activates the fiber (optical) combo port.
Usage guidelines
Combo interfaces are logical interfaces. A combo interface comprises one fiber combo port and one
copper combo port. The two ports cannot work simultaneously. If one port is enabled, the other port is
automatically disabled.
The following matrix shows the combo enable command and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules Yes
20-Gbps VPN firewall modules Yes
Examples
# Activate the copper combo port of combo interface GigabitEthernet 0/1.
<Sysname> system-view