HP VPN Firewall Appliances Network Management Command Reference

248
Usage guidelines
A QoS policy that has a CAR action can be applied to inbound or outbound direction of an interface.
If a QoS policy that has a CAR action and the qos car command are both configured on the interface,
only the CAR action in the policy takes effect.
A traffic behavior can contain only one CAR action. If you configure the car command multiple times in
the same traffic behavior, the most recent configuration takes effect.
Examples
# Configure a CAR action in traffic behavior database (set the CIR to 200 kbps, CBS to 50000 bytes,
and EBS to 0, and permit the conforming packets to pass, and mark the excess packets with IP
precedence 0 and forward them.)
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] car cir 200 cbs 50000 ebs 0 green pass red remark-prec-pass
0
Related commands
• classifier behavior
• qos policy
• traffic behavior
display traffic behavior
Use display traffic behavior to display traffic behavior information.
Syntax
display traffic behavior { system-defined | user-defined } [ behavior-name ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
system-defined: Specifies system-defined traffic behaviors.
The following matrix shows the keyword system-defined and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
F5000-S/F5000-C Yes
VPN firewall modules Yes
20-Gbps VPN firewall modules Yes