HP VPN Firewall Appliances Network Management Command Reference

253
display qos policy interface
Use display qos policy interface to display information about the QoS policy or policies applied to an
interface or all interfaces.
Syntax
display qos policy interface [ interface-type interface-number ] [ inbound | outbound ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number to display information
about the QoS policy or policies applied to it.
inbound: Displays information about the QoS policy applied in the inbound direction of the specified
interface.
outbound: Displays information about the QoS policy applied in the outbound direction of the specified
interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the QoS policy or policies applied to GigabitEthernet 0/1.
<Sysname> display qos policy interface GigabitEthernet 0/1
Interface: GigabitEthernet0/1
Direction: Outbound
Policy: user1
Classifier: default-class
Matched : 0(Packets) 0(Bytes)
Rule(s) : If-match any
Behavior: be
-none-
Classifier: traffic1
Matched : 0(Packets) 0(Bytes)
Operator: AND
Rule(s) : If-match customer-dot1p 3
If-match ip-precedence 5