HP VPN Firewall Appliances Network Management Command Reference

2
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] combo enable copper
# Activate the fiber combo port of combo interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] combo enable fiber
default
Use default to restore the default settings for an Ethernet interface or subinterface.
Syntax
default
Views
Ethernet interface view, Ethernet subinterface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] default
This command will restore the default settings. Continue? [Y/N]:y
# Restore the default settings for subinterface GigabitEthernet 0/1.1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1.1
[Sysname-GigabitEthernet0/1.1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to change the description of the interface.
Use undo description to restore the default.