HP VPN Firewall Appliances Network Management Command Reference

258
<Sysname> display qos carl 1
Current CARL Configuration:
List Params
------------------------------------------------------
1 MAC Address 0001-0001-0001
Table 56 Command output
Field Descri
p
tion
List CAR list number.
Params Match object.
qos car
Use qos car to configure a CAR policy on an interface or port group.
Use undo qos car to delete a CAR policy on an interface or port group.
Syntax
qos car { inbound | outbound } { any | acl [ ipv6 ] acl-number | carl carl-index } cir
committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] [ green action ] [ red
action ]
undo qos car { inbound | outbound } { any | acl [ ipv6 ] acl-number | carl carl-index }
Views
Interface view, port group view
Default command level
2: System Level
Parameters
inbound: Limits the rate of incoming packets on the interface.
outbound: Limits the rate of outgoing packets on the interface.
any: Limits the rate all the IP data packets in the specified direction.
acl acl-number: Limits the rate of packets matching the IPv4 ACL.
acl ipv6 acl-number: Limits the rate of packets matching the IPv6 ACL.
carl carl-index: Limits the rate of packets matching a CAR list. The carl-index argument is the index of a
CAR list and ranges from 1 to 199.
cir committed-information-rate: Sets the CIR in kbps.
cbs committed-burst-size: Sets the CBS in bytes, which specifies the size of bursty traffic when the actual
average rate is not greater than the CIR.
ebs excess-burst-size: Sets the EBS in bytes. The default is 0.
green: Sets the action conducted to packets when the traffic rate conforms to CIR. The default is pass.
red: Sets the action conducted to packets when the traffic rate exceeds CIR. The default is discard.
action: Sets the action conducted to packets: