HP VPN Firewall Appliances Network Management Command Reference

281
11.0.0.0/24, cost 1, nexthop 10.0.0.1, Imported
Table 59 Command output
Field Descri
p
tion
X.X.X.X/X Destination address and subnet mask.
cost Cost of the route.
classful-summ Indicates that the route is a RIP summary route.
Nexthop Address of the next hop.
Rip-interface Routes learned from a RIP-enabled interface.
imported Routes redistributed from other routing protocols.
display rip interface
Use display rip interface to display the RIP interface information for a RIP process.
Syntax
display rip process-id interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, the command displays information about all RIP interfaces for the RIP process.
Examples
# Display information about all interfaces for RIP process 1.
<Sysname> display rip 1 interface
Interface-name: GigabitEthernet0/1
Address/Mask:1.1.1.1/24 Version:RIPv1
MetricIn:5 MetricIn route policy:123