HP VPN Firewall Appliances Network Management Command Reference

282
MetricOut:5 MetricOut route policy:234
Split-horizon/Poison-reverse:on/off Input/Output:on/on
Default route:off
Current packets number/Maximum packets number:234/2000
Table 60 Command output
Field Descri
p
tion
Interface-name Name of an interface running RIP.
Address/Mask IP address and mask of the interface.
Version RIP version running on the interface.
MetricIn Additional routing metric added to the incoming routes.
MetricIn route policy
Name of the routing policy used to add the additional routing
metric for the incoming routes. If no routing policy is referenced,
the field displays Not designated.
MetricOut Additional routing metric added to the outgoing routes.
MetricOut route policy
Name of the routing policy used to add the additional routing
metric for the outgoing routes. If no routing policy is referenced,
the field displays Not designated.
Split-horizon
Indicates whether split-horizon is enabled:
• on—Enabled.
• off—Disabled.
Poison-reverse
Indicates whether poison-reverse is enabled:
• on—Enabled.
• off—Disabled.
Input/Output
Indicates if the interface is allowed to receive (Input) or send
(Output) RIP messages:
• on—Allowed.
• off—Not allowed.
Default route
Indicates whether sending the default route to RIP neighbors is
allowed:
• on—Allowed.
• off—Not allowed.
Current packets number/Maximum packets
number
Packets to be sent/Maximum packets that can be sent on the
interface.
display rip route
Use display rip route to display the routing information of a specified RIP process.
Syntax
display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ] [ | { begin
| exclude | include } regular-expression ]
Views
Any view