HP VPN Firewall Appliances Network Management Command Reference

284
# Display the routing statistics for RIP process 1.
<Sysname> display rip 1 route statistics
Peer Aging Permanent Garbage
111.1.1.2 1 0 0
Total 1 0 0
Table 62 Command output
Field Descri
p
tion
Peer IP address of a neighbor.
Aging Total number of aging routes learned from the specified neighbor.
Permanent Total number of permanent routes learned from the specified neighbor.
Garbage
Total number of routes in the Garbage-collection state learned from the specified
neighbor.
Total Total number of routes learned from all RIP neighbors.
filter-policy export (RIP view)
Use filter-policy export to configure RIP to filter outbound routes.
Use undo filter-policy export to remove the filtering.
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] | interface-type
interface-number ]
undo filter-policy export [ protocol [ process-id ] | interface-type interface-number ]
Default
RIP does not filter outbound routes.
Views
RIP view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter outbound routes.
ip-prefix ip-prefix-name: Specifies an IP prefix list by its name, a string of 1 to 19 characters, to filter
outbound routes.
protocol: Filters outbound routes redistributed from a specified routing protocol, which can be bgp, direct,
isis, ospf, rip, and static.
The following matrix shows the values for the protocol argument on different firewalls and firewall
modules:
Hardware Protocol ke
y
words
F1000-A-EI/F1000-S-EI bgp, direct, ospf, rip, and static