HP VPN Firewall Appliances Network Management Command Reference

298
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] rip default-route only cost 2
Related commands
default-route
rip input
Use rip input to enable an interface to receive RIP messages.
Use undo rip input to disable an interface from receiving RIP messages.
Syntax
rip input
undo rip input
Default
An interface is enabled to receive RIP messages.
Views
Interface view
Default command level
2: System level
Examples
# Enable GigabitEthernet 0/1 to receive RIP messages.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] rip input
rip metricin
Use rip metricin to configure an interface to add a metric to inbound routes.
Use undo rip metricin to restore the default.
Syntax
rip metricin [ route-policy route-policy-name ] value
undo rip metricin
Default
The additional metric of an inbound route is 0.
Views
Interface view
Default command level
2: System level